Agricultural machinery

As a trusted brand and supplier, UBC has enjoyed a good reputation and customer base in the agricultural machinery industry.

UBC deep groove ball bearings, tapered roller bearings, needle roller bearings, cylindrical roller bearings are widely used in tractors, harvesters, growers shafts and gearboxes for different applications.

Mining and processing minerals and cement

In fully mechanized mining equipment, 70% to 80% of the accidents are concentrated in the breaker, while 50% of the breaker accidents are caused by mechanical failure due to bearing failure and failure. damaged gears.

UBC bearings are developed for various coal machinery, representing the industry leading wear resistance and durability performance. The service life of UBC bearings in the main parts can reach 15,000 hours, and the large load capacity can greatly reduce the failure rate of the bearings. Easy installation and excellent impact resistance are two additional features of UBC bearings. Good lubrication and sealing performance, ensure a smaller coefficient of friction, double bearing life.

Car

UBC has developed and manufactured many promising bearings for wheel hubs, drive shafts, engines, gearboxes and axles.

With UBC wheel bearings, clearance is pre-adjusted during bearing assembly, so clearance adjustment is not required during installation.
The UBC bearing for the drive shaft is a wide inner deep groove ball bearing, and the inner ring is of non-standard size.

The sealing ring has a double-layer structure, which is dust, water and grease resistant. Lubricating grease is a high temperature grease with low friction and is suitable for automotive transmission shafts.
UBC’s 6214A-X2 wide series bearings are used in transmission shafts of heavy duty trucks. Its service life is three times longer than similar products.

With UBC wheel bearings, clearance is pre-adjusted during bearing assembly, so clearance adjustment is not required during installation.
The UBC bearing for the drive shaft is a wide inner deep groove ball bearing, and the inner ring is of non-standard size.

The sealing ring has a double-layer structure, which is dust, water and grease resistant. Lubricating grease is a high temperature grease with low friction and is suitable for automotive transmission shafts.
UBC’s 6214A-X2 wide series bearings are used in transmission shafts of heavy duty trucks. Its service life is three times longer than similar products.

Electric motor

UBC’s EMQ5 deep groove ball bearing is a super saddle when running, with pressed steel cage, G10 grade steel ball and imported grease to keep noise lower than 26 decibels, most suitable for household appliances.

To make the bearings last longer and adapt to higher load conditions, UBC optimized the internal design of the bearings, introduced advanced heat treatment production lines and quality green rings. high quality, and filled with imported grease to effectively reduce noise and frictional torque.

Sugar factory

The environment of the sugar mill is very harsh and the requirements for the bearings are relatively high. It requires bearings that can withstand dirt, water, dust, high temperatures, heavy loads, etc.

Despite the harsh working environment of the bearing, the production line of the sugar mill usually does not allow any pause in the production process, and the maintenance time of the sugar mill is also very limited, so these realities require high reliability of bearing and ready delivery.

The special manufacturing process applied by UBC bearings ensures longevity and load-carrying capacity. UBC’s well-established dealer network and adequate inventory also respond well to the sugar mill’s need for timely delivery.

Internet source